Planetary Gear Fidget *UPDATED*

Cool little set of planetary gears I threw together as a proof of concept

*NEW* 3 Geared Variant

*NEW* 5 Gear w Shafts

| Printing Settings |

• MUST be printed at a LH of .25mm or less
• MUST not be scaled down, unless your printer can handle ridiculously small tolerances
• MUST reduce the “Slice Gap Closing Radius” setting
• Scaling up is really cool but it can result in a wobbly fidget
• Set seams to the smaller side to prevent crunchy gears
• Tougher filaments tend to yield better results

Note - The shaft variant needs 5 E-Clips to stay together

Happy Printing!