Dragon Eclipse Custom Insert for the Standee Gamefound release.

This is for the Standee/Retail version of the game, if you have the Miniatures version please go to:  https://www.printables.com/model/1242970-dragon-eclipse-custom-insert-for-the-big-box-gamef

TLDR: Print 1 of each file except:

3x DE_LargeCards

2x DE_Token_Tray_Bottom

2x DE_Standees40Box

2x DE_Standees60Box

2x DE_StandeesLidWithLogo

The lid with the logo has a very thin layer so i advise letting your print cool fully before taking it off the bed to avoid warping but I have been assured it is sturdy enough ( i did not test print this myself)

Please note the deck box shown in the picture was an earlier version, the trays have been rotated on the model you download.

---

I don't charge for my designs, however if you would like to buy me a coffee you can do so here: https://ko-fi.com/denzarki

---

Update: 
1/ i have heard that if you sleeve everything it would need 4 of my large card boxes meaning that this insert does not work with a fully sleeved deck if you wanted to fit all content but i would suggest maybe only sleeving cards as they enter your party and decks if you'd like to use sleeves, not ideal though.

2/ thanks to Wolfan on thingiverse for the final screenshot (with black filament) that shows that if you don't print DE_Extra you can fit in the campaign add-on deck box 

3/ thanks to @MauriceJanss_3176710 for his idea for the standee boxes and for test printing and taking pictures for me.

The Long Bit:

Here is my big box insert for Dragon Eclipse with a small tweak to make it usable for standee/retail copies of the game.

If followed exactly you will be able to fit all of the base content, all of perilous seas, all of foray into the shadow realm and all extra mystlings. This does not hold anything from the untamed expansion or its mat. The card trays have been made wide enough to accept sleeves however please see update 2 above regarding what will fit.

You will need to print 1 of every file except:

3x DE_LargeCards

2x DE_Token_Tray_Bottom

2x DE_Standees40Box

2x DE_Standees60Box

2x DE_StandeesLidWithLogo

The lid with the logo has a very thin layer so i advise letting your print cool fully before taking it off the bed to avoid warping but I have been assured it is sturdy enough ( i did not test print this myself)

I welcome remixing just link to me so i can see it :D

The uploaded pictures should cover how everything fits but feel free to ask any questions. You will notice that the pictures will start off in the big box with orange prints, that is my original print, you can follow these pictures except of course where you see the binder being added, the print will then change colour to black, this will show you where to place the standee boxes (spoiler alert, its where the binder went)