February 5, 2022
Description
A longer version of the Caterpillar posted by FLink. Moved the parts around in Prusaslicer to fit as much as reasonably possible on the bed.
Some pieces in the corners might be stuck to eachother, but they should free up if you either press the 2 parts together (so the T-shaped bit loosens up from the part behind it) or pry them apart a bit with a knive.
Print in .20mm with 10% infill and you should be fine.
As with the original model, insert 2 bits of filament in the holes as feelers.
License:
Creative Commons — Attribution
Detri
