Catan Expansion Scenario Game Piece Boxes / Holder - Rickshaw Run, Pyrenees, Santa Claus & Easter

UPDATE 2025-05-27:     The initial dimensions were not correct for Box H, so that model was replaced with an updated version. Also, Box A-E was modified to provide better clearance between the game pieces and lid. That model was also replaced.

I was contacted by @seleng_2196631 to see if I could modify a Catan number token box that I designed previously

to accommodate various game pieces for different Catan expansion scenarios: Rickshaw Run/Rallye, Pyrenees Peninsula, Santa Claus & Easter. I wasn't familiar with these scenarios at all, but @seleng_2196631 provided photos and dimensions, including the compartment sizes of the game box that stores all of the pieces, which gave me a good idea of the size constraints (see attached photos). With that information, I was able to design these print-in-place boxes. They have a similar look and feel to the original design. Since I don't own these versions of Catan, I made the white inserts, which match the provided dimensions, to make sure that the boxes worked. The inserts are labelled in the photos. This shows you what boxes accommodate what capacities and dimensions of game pieces.

I printed these with 100% infill, 3 walls and top/bottom layers, 0.4mm nozzle, 0.2mm layer height, Basic PLA, no supports, 2-line skirt.