Army Base playset with Micro Scale vehicles

This model is intended to be used as a display terrain or playset for military models or toys.

This model features a runway, a helipad, a garage, an HQ building, and an elevated road. 

The vehicle models include: a Tank, a Jet Plane, a Radar Jet Plane, and an Army Helicopter.

The playset model prints as a single piece. The vehicles print as separate models. 

The playset can be printed at any scale, and the included vehicle models can be printed as small as Micro Machines or as large as a Tonka Truck. 

Keep in mind the maximum playset scale depends on your printers build area size. 

My printed examples were made with minimal infill, less than 10% for the playset. Results may vary based on individual printers and settings.

The garage on the playset is built into the model, if you want to fit vehicles in the garage, you may want to scale up or widen the playset model in your slicer software. If scaled large enough, the garage is the only part of the playset model that may need supports. 

The Helicopter model's STL file may need to be rescaled to match the scale of the other vehicle models. Also, one last thing about the Helicopter model, while other slicers should work, there is a known issue with the Helicopter Model when opened in the Anycubic Slicer. If you try to save it as an STL file in Anycubic Slicer, it crashes the slicer. This does not seem to happen in Cura. 

Thank you for taking a look at my model, please let me know what you think of it.