Volvo C303-Facelift 32 Scale

Introduction:

This is a 3D printable scale model of an off-road van inspired by the legendary Volvo C303 – a military-grade workhorse known for its rugged design and go-anywhere attitude. Designed with clean lines and simple assembly in mind, this model is perfect for display, diorama builds, or collectors of vintage and military vehicles.

Parts to Print:

Print the parts as per the list. Use recommended colors for best results.

Print Process:

Position the parts in slicing software with orientations shown in the following images. Correct orientation is important for printing without additional support.

Color Parts: 

Black Parts: 

Print Settings:

The model is designed for printing with a 0.4 mm nozzle and requires no additional supports. Use the printer-specific settings for the best quality prints.

Layer Height: 0.2 mm

Infill: 15–20% is sufficient for most parts

Supports: Not required. Orient the parts as shown in the images above.

Material: PLA recommended; ABS or PETG also compatible

Bed Adhesion: Brim optional for Cab and Roof.

Post-Processing:

The prints may require finishing before starting assembly. The process involves removing the in-built supports, stringing if present, and smoothing the rugged edges. You may require the following tools as per preference and availability:

• Cutter or Knife
• Sandpaper or Small Files
• Adhesive (SuperGlue)

Assembly Instructions:

Watch the following video instructions for the model assembly. Check for tolerances before assembly. Use the appropriate tool for sizing the joint members. The press-fitting of some parts may require force. Use pliers or a vice for fitting, if necessary. In case any joint feels loose, use adhesive to fix the joint.