Display Stand for Transformers Age of the Primes Solus Prime

With the legendary Primes upon us, they will need some equally grand stands to be displayed upon. So, let's get started with one for Solus Prime!

This set comes as a simple pedestal stand with floating overhead logo which can be lit up.

How the light up logo works is by installing a LED light source in the rear of the case, which has a removeable back. The logo front piece itself is a multi-material print, mostly in black filament but with logo portions done in clear filament subsequently painted blue.
 
Here's the piece removed, showing the CR2032 batteries and light source. Admittedly, this is a little bare-boned but sure works to back light the logo!

 
An alternative back which holds a Solus Prime Master has also been designed! This fits similarly into the back of the logo piece and a prime master can be emplaced nicely into it.

This allows you to rotate the stem of the display stand around to display and use the Prime Master above AotP Solus Prime if you prefer that look.
 
For the logo piece, if you do not have a multi-material 3d printer, we've also included a version where the logo is extruded.

 
And for a bit of utility, the base piece is also doubles up as a lidded box where small accessories and can be safely stored.

=== Assembly ===

The included diagram shows a look at the parts which make up this build, and how they go together.
 
The LogoBox-Case and LogoBox-Logo files are designed to be loaded into the slicer at the same time for multi-material printing.

===

Hope this will be a fitting way of starting to display the legendary forebears of the Transformers in your display! Happy 3d printing! =)