Gap Fillers for Transformers Age of the Primes Megatronus

Having just landed, Megatronus is indeed a wonderfully designed figure!

Only slight bug bear has been two hollow spots in his arms and thigh. While these are not so obvious in bot mode, they come right up on this top facing turret in alt mode -- so, let's try to remedy that with some gap fillers!
 

These fillers tab into the hollow portions of arms and legs and fit snugly in there. Here's a before (left side) and after (right side) shot showing the difference.

The thigh fillers are are a little trickier as we've designed two tabs on the rearward side of each - one for bot mode and the other for alt mode. So for bot mode, just make sure that the longer tab is on top, and that will snap into the corresponding notch there.

Color-wise, we've mixed some gun metal paint with black to darken it to try to match as best we can to his original dark evil paint scheme!

Coming over to his alt mode, the arm fillers simply just remain in place. The thigh fillers however, will need to be removed to allow for transformation, then re-attach onto the top forward part of the turret, by aligning the shorter peg forward to go into the rectangular notch there.

===

Hope these fillers will come in handy to make your own Megatronus feel a little more solid than he is already our of the gate. Happy 3d printing! =)