June 19, 2025
Description
Design meant for single extruder printers.
Material - PLA
Layer Height - 0.3 to 0.4 mm
Perimeters - 3
Infill - 15% gyroid
Supports - Used organic supports on the trays only
For contrasting colors shown, change filament color at these heights
Top of Case (to highlight build platform) - 2.9 mm
Bottom of Case (to highlight LEGO logo) - .9 mm and 1.7 mm
Assembly requires M3 screws nuts
Latches/Handles - (2) M3 x 40 mm screws & (2) nuts
Hinges - (2) M3 x 30 mm screws & (2) nuts
Recommend using Prusa nut pulling technique to set nuts
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Hank
