Cannon Turret for Transformers Age of the Primes Fisitron

Having just got our AotP Fisitron (Ironfist by any other name ...), the diminutive canon turret was a little disappointing. So, let's fix that and give him something more to scale with his earlier G2 appearance!

Looking at his alt mode first, the turret attaches right onto the central 5mm port in the middle of his roof. Not passing on the chance to integrate effect part compatibility with the front of the barrel here.

Here's how it looks like from the rear, with handles which can be removed if you prefer.

Also, the front barrel has been designed to peg into the cannon body, and so both front-facing sides can have effect parts swapped in!

Changing over into standing turret mode for Fisitron's bot mode, simply flip out and straighten the stand. And this should bring the turret to a proper height for Fisitron to hold and aim!

=== Assembly ===

The included diagram shows a look at the various parts of the build and how they go together.

For the Body and Magazine - you can choose to either print them in a single piece using the "-Whole" file, or print them separately in their various colors and then assemble/glue everything together.

The parts of the articulated stand are to be connected using cut-to-length 1.75mm filament as shown.

===

Hope this larger version of the turret will bring much needed firepower for your Fisitron. Happy 3d printing! =)

===

This model is not to be uploaded or sold in any form and is intended for personal use only.

Check out more of what we are up to over at our Facebook Page (http://www.facebook.com/FunbieStudios) or website (http://www.FunbieStudios.com/)

Support us on Patreon - https://www.patreon.com/FunbieStudios | Full listing of Models - https://funbiestudios.com/model-catalog