Pump Action Full Length Twopoon

A pump action, full length, double barrel, high powered, remix of the skewer. 

The stock attaches with a 10-32 screw and nut for the top hole. The bottom 2 are just the nuts that secure to the threaded rods. 

The pump grip middle bars requires the shorter 10-32 screws to stay on. 

The file folders named BLACK and WHIT are what I used in building this, as finding a reference is ass.

The top rail needs to be cut in the slicer to fit on most printers. 

I had to cut the front grip hole a little to fit the triggers. This is a problem on the normal twoer as well. 

I had to use 2 o-rings on the ramcore to make the blaster seal. 

-Extra special hardware

4 28.5 10-32 threaded rod.

2 30 7/8 10-32 threaded rod for the stock attachment. 

2 .75 inch 10-32 screws for the bars inside the pump grip. 

4 C4 bars

4 10 inch 5/16 tubing

Also a remix of the pumppoon by shoelesshistorian (files are not public yet). Specifically the pump grip to use c4 bars.