XXL Axolotl - Members Exclusive

This Axolotl is absolutely HUUUUUUUUGE and I’m so excited to share it with you!

🛡 Members Exclusive!
📏 Almost 80cm / 31 inches long!
💪 Printed at 400% scale compared to the original cute Axolotl.
👉 Printed with 1,2kg of filament!
👀 The Eyes are also separated - black and white parts!

🖨 Printed on my Bambu Lab X1C with the following settings:
- Layer height: 0.2mm (for smooth results)
- 2 walls
- 15% infill – adaptive cubic
- No supports needed! 🙌

🧩 Assembly notes:
- The connector parts match the same-named pieces (e.g. head + head connector)
- Arms and legs have left and right connectors
- Simply insert and plug together – super easy to align
- Glue required: make sure to glue only the connector to the receiving part
- ⚠ Do NOT glue the jointed (moving) parts or they’ll lose articulation

Printed with beautiful Chitu Systems Conjure Filament! 🧵
If you buy Filament from this Link you also support me and my work, plus you get premium materials to print.

Enjoy✅

This design is under copyright. Which means, upon purchase, you do NOT have the right to sell commercially. If you are interested to get access to my exclusive Design Library & the commercial License to sell the printed models check out my Printables Club Membership. Please note that you only have a commercial license with active Membership and it is absolutely forbidden to share the digital Files!

Filament Brands I recommend:  
Formfutura 
Polymaker  
Chitu Systems 
Azurefilm 
These are affiliate Links. If you buy Filament from this Link you also support me and my work, plus you get premium materials to print.