CyberBase System - Dustfree Enclosure

Here's a little utility set to enhance the CyberBase System and make for dust free enclosures!

This set come with a pillars for acrylic sheets of 2mm thickness to slide in and be held in place.

To make it easy to still move your bots around in there, the front side of this setup creates a hinged door which magnetically snaps to close.

In terms of size, this setup should take figures up to Voyager size pretty comfortably.

=== Assembly ===

The included diagram shows various parts of this build and how they are to be assembled.

Do note that you will require the acrylic pieces of 120mm X 200mm x 2mm (thickness).

Optionally to help the door snap shut, you will need four 5x3mm circular magnets.

===

Hope this set will come in handy to keep your figures safe and dustfree. Happy 3d printing! =)

===

This model is not to be uploaded or sold in any form and is intended for personal use only.

Check out more of what we are up to over at our Facebook Page (http://www.facebook.com/FunbieStudios) or website (http://www.FunbieStudios.com/)

Support us on Patreon - https://www.patreon.com/FunbieStudios | Full listing of Models - https://funbiestudios.com/model-catalog