connect 4 / 4 in a row / 4 wins / box travel game toy storage

This storage case contains of two parts.
A bottom box and a top lid.
They slide easily into each other.

It is a replacement for the original paper case that my mother in law is using since many years.

I printed them on my Bambu Lab P1S with the following settings:

Material: PLA Sparkle from Bambu Lab in Crimson Red
Nozzle-Temp: 220°C
Bed-Temp: 55°C
Support: No
Nozzle: 0,4mm
Layer Height: 0,2mm
Infill: 15%
Initial Layer Speed: 50mm/s
Outer Wall Speed: 200mm/s
Inner Wall Speed: 300mm/s
Infill Speed: 250mm/s
Travel Speed: 500mm/s
Fan Speed: 100%