Sliding 1x2x3 V3.1- 3x3mm Magnets

This is a modified version of the Sliding 1x2x3 twisty puzzle, originally designed by NKCubed and remixed by dreadful54. The remixer changed a few small things, as well as adding 4x2mm magnet holes. However, as I only had 3x3mm magnets on hand, I modified the remixed design to work with that magnet size.

Additionally, as I found out soon after printing, 3x3mm magnets were perfect for me, as they weren't too strong but not unnoticeable either.

Full credit goes to the original creator, NKCubed, and remixer, dreadful54. I just changed a couple magnet hole sizes.

Printing

Check out NKCubed's original design for detailed assembly information, a video, and a list of parts necessary to print here: www.thingiverse.com/thing:2831110.

I would recommend 3 walls for durability, but everything else is up to you as this print won't be under mechanical stress.

License

This is shared under the CC BY-NC 4.0 license, meaning you can share and adapt copies of this design as long as you give proper attribution. This requires you to include the name of the creator (Ethan Bayer), a license notice, a link to the original material, and, optionally, the title. You may NOT sell the design.

Example

“Sliding 1x2x3 V3.1- 3x3mm Magnets” (www.printables.com/model/1383035-peloton-bike-towel-hook) is designed by Ethan Bayer and shared under a Creative Commons - Attribution - Non-Commercial (CC BY-NC 4.0) license (creativecommons.org/licenses/by-nc/4.0).

Remix Attribution

“Sliding 1x2x3 V3.1” (www.thingiverse.com/thing:3430765) is designed by dreadful54 and used under a Creative Commons - Attribution - Non-Commercial (CC BY-NC 4.0) license (creativecommons.org/licenses/by-nc/4.0).

The original work is “Sliding 1x2x3 V3” (www.thingiverse.com/thing:2831110) by NKCubed, used under a Creative Commons - Attribution - Non-Commercial (CC BY-NC 4.0) license (creativecommons.org/licenses/by-nc/4.0).