X-Shot Micro 2.0 Reshell 6 - Mag-Fed Variant v1.2

So! The preamble: 

This is a shell for the X-Shot Micro 2.0, the newest tiny blaster variant from X-Shot/Zuru. All the hardware you need is already provided by this Micro, too. (Well, except for a few common household rubberbands and some crafting foam for the seal.) You just need to print the parts in the colors of your chosing and you’re good to go to take a screwdriver to the blaster.

The details:

We have now finally reached a technology level, gotten here step by step, where I can feed these Micro reshells from a talon magazine! The magazine nicely doubles as a foregrip for this, too. Good slab-aesthetic as well. Very chunky, yet sleek.

As secondary feature this blaster too comes with a double-action trigger; meaning you prime and fire the blaster with the same two-finger pull. This felt like the right place for that kind of tech.

This whole system works best with darts where the head is smaller than the body. Other darts tend to have so-so results, from what I hear from my beta testers. Do let me know your own results!

---

A firing demo, made by yours truly:

---

Printing

All parts can be printed on a bed of 180mm edge length, if I didn't mess this up. Some supports will be required, but everything should already be in its proper orientation. I tend to print with 4 walls and 10% cubic infill. The alternate plunger might need more, depending on your filament brittleness.

The assembly instructions can be found here -> https://wildwestscifi.net/x-shot-micro-2-0-reshell-6-mag-fed-variant-assembly-instructions

---

Changelog: 
v1.0 
- Initial Release

v1.1
- I forgot to add a gap around the magwell for the fork arm to go around. That has been fixed. It should slide much more smoothly now. (Especially if your printer has a habit of overextruding.)
- I also reinforced the mag release ever so slightly, to make it hold magazines better
- I also fixed the pins on the barrel being somehow 2mm off. Not sure how that happened.

v1.2
- Fixed the barrel insert for crafting foam having somehow reverted to an earlier (and faulty) model. Now the screws should fit properly and the floating seal work again. No idea how that happened.