Mini GT HKS Toyota GR Supra Display Base

Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068

Custom display base are also available from $5! Contact me to discuss what you want!

If you like my work, you can support me Printables Clubs! Just click the “Support & Join”  button beside my name or here: https://www.printables.com/@GigaPenguin#join:279  

Exclusive models are included too!

You can also support me through Patreon too: https://www.patreon.com/gigapenguin3dprints/posts

Description

In this display base, I have also included an additional generic base so it is not fixed to the Mini GT HKS GR Supra.

The display base is separated into 3 parts for easy printing and colour swap. The parts are:

1) Name plate (NamePlateAssem.STL and NamePlateHKSOnly.STL)
2) Base (BaseV2.STL and BaseV2 (NoHoles).STL)
3) Base back wall (BoxBackV1.STL)

Base and Name Plate Variants

There are 2 variants of Base and Name plate in this, the one in my pictures are "BaseV2" and "NamePlateAssem".

The difference for each base are:

BaseV2:

My standard base design with holes pre made so that wires can go through to hold the car.

BaseV2 (NoHoles):

My standard base design but with the holes removes, so you could drill your own holes to fit any car you wanted.

The difference for each name plate are:

NamePlateAssem:

As shown in the picture, it is made for the HKS GR Supra with modelled HKS and Toyota Supra names on it.

NamePlateHKSOnly.STL:

A generic design with just the HKS branding on it.

Print Settings

Nozzle size = 0.4 mm (minimum, smaller better)
Layer height = 0.2 mm

Filament change layer for colours on "BoxBackV1":
1) Layer 19 (Lower HKS tear design, mine is in green)
2) Layer 24 (Upper HKS tear design, mine is in purple)
3) Layer 29 (HKS thin lines, mine is in red)
4) Layer 34 (HKS logo background, mine is in white)
5) Layer 39 (HKS lettering and border around the square, mine is in black)

Filament change layer for colours on "NamePlateAssem":
1) Layer 7 ("Toyota" lettering, mine is in red)
2) Layer 11 ("Supra" lettering and HKS square background, mine is in white)
3) Layer 15 (HKS lettering on square, mine is in black)

Filament change layer for colours on "NamePlateHKSOnly":
1) Layer 8 (HKS square background)
2) Layer 13 (HKS lettering on square and borders around the square)

Colours

Colours of all other items is your choice.

Assembly

The car is tied with metal wire through the display base holes, the wire will need to be slide between the wheels and the metal body.

Back plate should slide in nicely into the display base. The name plate might need some trimming to the side to fit into the box.

Others

I have not test both generic design, but they should print just fine.

Feel free to send me any feedback on how to improve the design. Suggestion on display base designs are welcomed too.