Gunk Addon Kit for Transformers SS86 Megatron

Note: This is a digital product of 3d printable STL files for use on a 3d printer

And so, here's our updated Gunk (Gun + Tank) kit for the latest SS86 version of Megatron!

To attach the handle onto Megatron in his alt mode. the back piece just needs to be held between his leg pieces. Slide this piece forward, and push the lower block forward such that it sits in front of the toe pieces.

Finally, the longer barrel attached onto the original tank barrel to complete the look!

For more display and play options, we've also provided small effects part adaptor to help hold effect parts in the front of the barrel.

As an alternative, if you would prefer to use our earlier Fusion Cannon kit on Megatron, we've also included a version of the barrel which would fit on that just nicely. You'll just need to swap out the original barrel for the longer one in this kit.

=== Assembly ===

The included diagram for this kit shows how the parts are meant to fit together.

Just like the previous kit, there are two options for the handle - a solid version and a shelled version which allows a keyboard switch to be used to make for a clickity trigger.

For the latter version, these are the additional pieces of hardware required:

Keyboard Switch * 1

M3x18 Hex Bolt * 1

M3x16 Hex Bolt * 2

M3 Hex Nut * 3

====

This model is not to be uploaded or sold in any form and is intended for personal use only.

Check out more of what we are up to over at our Facebook Page (http://www.facebook.com/FunbieStudios)

Support us on Patreon - https://www.patreon.com/FunbieStudios | Full listing of Models - https://funbiestudios.com/model-catalog