Adventure Force Maxim Pro Drop-In Dual-Stage Trigger

This is a drop-in, dual-stage trigger mechanism for the Adventure Force (Dart Zone) Maxim Pro. This requires no additional hardware

Includes:

• Dual-Stage Button Linkage (Supports required. May also require a bit of filing on the slope)

• Back-Strap Rev Switch Cover

• Safety Delete Cover

Steps:

• Remove all parts related to the trigger, safety, and rev mechanisms (This will require temporarily unscrewing the rev switch, as one of the screws is hidden underneath it)

• Remove the screw holding on the right side black grip plate

• Install the Back-Strap Rev Switch Cover

• Screw it into place with the screw you just removed, securing it and the right side black grip plate in place

• Install the Dual-Stage Button Linkage

• Insert the spring from the trigger lock onto the linkage

• Reinstall the trigger and it's mechanism (This may require pushing the linkage down a bit while installing the trigger. It should all click together)

• Insert the Safety Delete Cover at the the bottom of the grip (The smaller side should friction fit into the right side of the grip)

Please Note:

• These parts were made/modified in Blender, and, therefore, may have minor imperfections

Edits:

• September 22nd, 2025: Updated Dual-Stage Button Linkage to V2 (Redesigned from scratch for better fitment, increased sturdiness, and to fix an issue with the slope)