Snap action snake toy. Single part model.

Print at least 10 pieces.

Recommended print settings:

• Material:  PLA 
• Layer Height: 0.10
• Infill % : 15
• Supports: No
• Print Orientation: As oriented in STL.

Additional items required:

• Rubber band / Gum band
• Optional: CA glue, e.g. Super Glue

Assembly:

1. Tie a knot in one end of the rubber band.
2. Thread the other end of the band through each piece, making sure each piece is oriented the same way divots towards protrusions)
3. When all pieces have been connected, stretch the band and tie another knot at the opposite end.
4. Optional: Fix the knots in place with a drop of glue (be careful not to use too much, or it will make the pieces stick together!)