March 14, 2026
Description
Holder for the Hobbyhorses of my girls.
There were already others, but they weren't as easy to use for the Kids.
Materials:
PLA
3 or 4 Walls,
15% Infill,
no supports
V1:
Some 10mm Screws and if needed a 45mm long screw.
V2: now has a locking Pin the rotating part ist fixes to the rod with a pice of Filament and welded in place. On the other Side is a place for an m3x5,7 Insert and also on the big pice. Use some String there to connect it.
simple to print.
License:
Creative Commons — Attribution
Scared__Bunny
