Zuru XShot Piston Pump - Lasgun

Another mashup of community models, this time to resemble a Warhammer 40K Lasgun. Inspriation taken from the Kantrael Pattern, but all actual design derived from the above sources.

The intention of the barrel is to be a one-shot replacement for the stock barrel, in three stages. First stage is long enough to get the performance to 130FPS, appropriate for LARP. Second stage adds a little rifling. Third stage is a faux barrel, hopefully doing nothing to the performance, but making the whole thing look like a Lasgun cosmetically. Prints well in Bambu Studio on my P1S angled at 45 degrees then rotated 45 degrees to get it oriented from one opposite corner to the other; diagonal layering will likely improve strength too.

The shroud is an extended version of the original to give that boxy Lasgun look. The bracket has been modified to hug up to the magwell. The rails connect the shroud to the bracket and use 4x M3 10mm bolts.

I've linked to the stock I've used in my origins, but I've not made any changes, nor am I reposting the files here; go to the original page if you want to use them!

As with the Bolter, I've crudely mashed this up with Tinkercad, apologies for any mess!