Ice-Cream Play Set
A pretend-play ice-cream kit: colorful scoops (different “flavors”), two cone sizes (small and large), a scoop spoon with lever, a cone stand, and an ice-cream tub with lid. The large cone fits 3 scoops plus a decorative wafer.
Scoops do not lock to the cones on purpose — kids need to carry them carefully, which is great practice for gentle handling and fine motor control. You don’t want your icecream to fall on the floor! Mix and match flavors any way you like.
Why it’s fun
- Flavor combinations and stacking challenges
- Trains fine motor skills & patient, careful movements
- Scoop spoon with a lock and release lever
- Full “ice-cream shop” experience: scoop → stack → serve in the stand
What’s included
- Scoops – multiple “flavors” (print in different colors)
- Cones – Small (1 scoop) and Large (3 scoops)
- Decorative wafer – topper for the large stack
- Scoop spoon – two-piece body with lever
- Cone stand – holds both cone sizes
- Ice-cream tub – container + cover
- A plastic spoon
- A cup for spoons
Note: Scoops do not attach to cones (no magnets/snaps) by design.
Print settings
- Material: PLA (pretend play only; not food-safe),
spoon lever – PET-G (PLA will deform)
- Nozzle / Layer: 0.4 mm / 0.20 mm (for scoops you can change layer height to 0,07-0,1 near the top)
- Perimeters / Infill: standard, 2–3 walls; 15% infill
- Supports:
- Icecream Scoop3 requires supports
- Scoop spoon halves require supports
- Tub lid requires supports
- Stand also requires supports
- Orientation: Files are pre-oriented for printing
Assembly
- Scoop spoon: Print Left and Right halves + 2 bolts, insert the lever into its slot.
Align, press or glue together if needed (CA or epoxy).
Safety notes (important!)
- Pretend play only. Not for real food or drinks.
- Always use under close adult supervision.
- Not for children under 3 years. Small parts—choking hazard.
- Do not put in mouth, do not bite, do not swallow. The scoop size is 42 mm.
- PLA softens around ~55 °C. Keep away from heaters, hot cars, and direct sun.
- Cleaning: Wipe with a damp cloth only. No dishwasher. No harsh chemicals/solvents.
- Adhesives/finishing: Use hobby-safe glues/paints; allow full cure and off-gassing before giving to kids.
- This is a DIY 3D-print model, not a certified toy. Use at your own risk.
Drabulok
