Doctor Who - Figure 002 - Quark (from The Dominators)

Doctor Who - 5.5" Scale Quark from 'The Dominators' 
Designed by Troy Ryan Wood and the 3D Printing Doctor Who Project 
Not for commercial release. All IP rights belong to the BBC or current copyright holder.

-----------------------------------------------------------------------------------------------
Creative Commons License
-----------------------------------------------------------------------------------------------
CC BY-NC-SA 4.0 International (Attribution-NonCommercial-ShareAlike)
https://creativecommons.org/licenses/by-nc-sa/4.0/ 

Please visit https://www.3Dprintingdoctorwho.com for detailed assembly and painting instructions, 
a comprehensive 3D Printing FAQ, and a complete list of all the other Doctor Who action figures, 
customizing parts, and props that I and our numerous guest artists have created to share with 
fans like you!

All my figures are provided 100% free for non-commercial use, but if you've enjoyed my work and 
would like to donate a small amount as a way of saying thanks and help offset some of my ongoing
expenses, I do accept tips at https://ko-fi.com/troyryanwood

-----------------------------------------------------------------------------------------------
Pre-Printing Notes
-----------------------------------------------------------------------------------------------

The files used to print this figure are divided into folders for PLA (filament) or SLA (Resin) 
printing. The PLA version uses pop together joints while the SLA version uses special glue-in
neck sheath part, so don't mix and match between the two.

There are several optional extras, including hexagonal background walls and the Dominators'
atomic drill. The SLA versions comes with two alternate heads, one with tubes and one without.

The eye tubes are too small to print properly on a filament printer, so they will likely come
out looking blobby or like little sticks. If you are printing out of PLA, I recommend paying 
a little bit more for buying PLA+ which will give you better surface detail and less noticeable
layer lines.

For maximum authenticity, print the body out of grey resin/filament and the head and drill 
segments clear.

If you have the option, I highly recommend printing the head out of clear SLA resin, 
preferably 3D Materials Superflex if you can get it, because the pyramid tips are *INCREDIBLY* 
sharp but also fragile. Flexible clear resin will make the tips slightly bendy so they won't 
break or impale you during play.

-----------------------------------------------------------------------------------------------
Assembly & Post-Printing Notes
-----------------------------------------------------------------------------------------------

PLA Parts are designed for snap together assembly and require removal of frame structure with an
xacto blade. For maximum structural integrity I recommend printing the head and limbs at 100% fill.

The SLA version require the following off-the shelf parts for assembly:

One 1.5mm wide brass craft rod to be trimmed to length for arm and hip joints. 
These craft rods can be found online or in most craft stores that have a model airplane section. 
Alternatively you can use a wire coat hanger, small nail, rigid wire, or even a toothpick.

Before you paint and assemble it is recommended that you fit all parts together without glue
to make sure all points of articulation fit together and move freely. You may need to sand 
down some parts or drill out holes if pieces do not move smoothly.

Please see https://www.3Dprintingdoctorwho.com/002.html for detailed paint and assembly instructions. 
-----------------------------------------------------------------------------------------------
Additional 5.5" scale figures available on https://www.3dprintingdoctorwho.com (as of 9/24/2025)
-----------------------------------------------------------------------------------------------
001  Alpha Centauri
002  Quark
003  Chumbley
004  SIDRAT
005  Larvae Gun/Venom Grub
006  Dalek Time Machine 
007  Zarbi 
008  Dalek Hoverbout 
009  Servo Robot  
010  Exxilon Root  
011  Dalek Transmat  
012  Keller Machine  
013  War Machine  
014  Rutan Scout  
015  Hand of Omega  
016  12th Doctor’s Guitar
017  Ogri 
018  Yeti Mk. I
019  Taran Wood Beast
020  20th Anniversary TARDIS Console
021  Wirrn
022  Kroton
023  Season 14 Newbery TARDIS
024  The Master's TARDIS (from Claws of Axos)
025  8th Doctor TV Movie TARDIS Console Room Playset
026  Toymaker's Robot
027  Mk. VII Robotic Cleaner
028  Kroagnon
029  Raston Warrior Robot
030  Meglos
031  Junk Mail Robot & Spy Kite
032  Voord
033  Zero Cabinet
034  Sensorites
035 Erato & Wolf Weeds
036  Aggedor
037     Wirrn Infected Noah
038     Necros Incubator Dalek
039     KLF "Doctorin' The TARDIS" Dalek
040     Silurian 
041     Arcturus 
042     Spiridon 
043     Eye Plants
044     Mire Beast
045     Yeti Mk. II
046     Morpho Brain
047     Nucleus of the Swarm
048     Ogron Eater
049     Nyssa
050     The Master (Ainley)

REMIX001 Battle Damage Emperor Dalek
REMIX002 Kronos (Chronovore)
REMIX003 Meddling Monk and TARDIS
REMIX004 Key to Time and Tracer
REMIX005 Tractator and Gravis
REMIX006 Mandrel and CET Machine
REMIX007 Solonian Mutant
REMIX008 Kandyman

-----------------------------------------------------------------------------------------------
Don't forget to check out the Guest Designs section of the website for over 100 more figures,
playsets, props, and customizing pieces!
-----------------------------------------------------------------------------------------------