"Wirbelix" the hand mixer!!!

Children's kitchen toy mixer “Wirbelix”!

- The mixing rods can be rotated freely.
- The switch has 3 settings. 0 - 1 - 2
- The front has a rattling effect when the rattle blade is installed.
- The rattle crank is optional.

- Matching mixing bowls also included.

-Everything has been tested and can be easily clicked into place.

Supports:

Supports are needed in a few places, see pictures, if you don't want to determine the supports yourself, use the 3mf files and set supports to: “for support enforcers only”.  (from 3mf: Import 3D models only.)

Infill:

Between 10%-25% infill should be fine.

The body and everything else can be printed with 10% infill.

The Stirrers should have 20% - 25% infill to make them more reliable.
 

Perimeters:

2-3 perimeters.

----------------------------------------------

The "FrontRattle" is designed for one-time installation and is difficult to remove once installed.

I am an absolute fan of no support prints, but the model would have lost functionality in many places if I had designed it without supports.

----------------------------------------------

Have fun and happy printing. ;)