October 24, 2025
Description
The box the UNO cards comes in always breaks so this box helps keep everything together.
Look at your slicer and change the colors on the lid so you can get the UNO logo right. (I missed the transition to yellow in the picture)
The lid fits tight. Mine did not require sanding. If it Is too tight for your liking you should be able to sand the edges of the lid down to make it work
I printed mine with PLA and 10%infill.
Check out my other 3d models for other card boxes
License:
Creative Commons — Attribution — Noncommercial — NoDerivatives
Makes_by_Jake
