October 1, 2025
Description
I designed a 12-piece toy set to play Witch's Kitchen: brewing magic potions, combining ingredients and crafting spells!
The set includes the basic witchcraft cooking necessities:
WARNINGS - Not suitable for children under 3, do not mix these toys with real food or encourage contact with the mouth. Do not wash with hot water, dishwasher, or abrasive chemicals.
Parent guidance suggested.
I am not responsible for damages or injury resulting from use. Only digital files are provided. Parents accept these responsibilities when downloading and printing these toys as all settings and materials are up to them.
Because they are toys, use 3 perimeters and 20% infill, not lightning. Better to make them last and resist tear and wear of child use than to break and have to reprint.
All parts print without supports. The maximum overhangs are 30-35 degrees. If you experience sagging, add paint-on-supports where needed. Avoid automatic supports everywhere.
I did not use brims or rafts, but you can if you experience adhesion issues.
Use a lighter or heat gun to remove hairs, strings or sagging.
All parts print with the flat large area on the print bed for orientation:
0.2 mm layers, except for the Cauldron, which used 0.28 mm layers and fuzzy skin.
Adjust the scales of anything you want, larger or smaller. These sizes fit the print bed of a Prusa MK4. If you scale the bottles or bottle rack, make sure to also scale the other so they fit well. The ingredients are scaled to fit inside the cauldron's opening.
Filaments that I used:
Some details painted with acrylic markers.
All parts made in parametric software and some tweaks in Tinkercad and PrusaSlicer. No AI or remixes.
Everything printed in a Prusa MK4.
Special thanks to H the fantastic model.
License:
Creative Commons — Attribution — Noncommercial — NoDerivatives
Dany Sánchez
