Transformers Core Class Display Bases

So having a bunch of core class bots lying around messily - it seemed like time to come up with some sort of display and organization system for them! And so, here's the Blokees base compatible system for core class bots, with one of the key ideas being custom name tags for them!

And using our earlier tier system, these can again be stacked vertically for more space savings too!

So essentially, these bases will snap together with Blokees bases if you have those handy.

For the individual printed base piece, we've added in a pair of 3mm ports if you would like to store their accessories on it for safekeeping. There is also a 5mm port for accessories with that sized peg.

Or alternatively, the 5mm peg will also allow the included name tag to sit in there!

These name tags were printed in black and then had their letterings painted in with a chrome marker. And they are best printed with a thinner layer height with a smaller nozzle if possible (though we did ours with a standard 0.4mm one here)

Once the individual bots' bases have been setup, you can connect them up using the provided connectors and pillars as you choose, or mix and match with your collection of Blokees bots too!

=== Assembly ===

The included diagram shows a look at all the parts which make up this build.

And just for some of the other bots in the core class lineup, we've done up a bunch of their tags (though we might come up with a way soon to allow for more customizing of these too!)

===

This model is not to be uploaded or sold in any form and is intended for personal use only.

Check out more of what we are up to over at our Facebook Page (http://www.facebook.com/FunbieStudios) or website (http://www.FunbieStudios.com/)

Support us on Patreon - https://www.patreon.com/FunbieStudios | Full listing of Models - https://funbiestudios.com/model-catalog