Nerf/Airsoft Play Knife

For assembly, you will need…

• 1x Blade
• 2x Handle
• 3x Pin

To assemble, place all three pins through the blade, then use glue on the flat side of the handles, close the assembly and clamp in place until dry. I used normal white PVA glue, but any glue should work.

If used for play, please print the blade section in TPU or another flexible filament. I wouldn't exceed 15% infill to make sure the knife remained bendable enough to be safe.

If printing for the intention of playing with others, make sure all parties consent to such a toy being used. A TPU ‘knife’ might not be dangerous, but it still can hurt.

I release all my models under Creative Commons Attribution, but if you find my models helpful, feel free to tip me here: https://ko-fi.com/derpynate