January 4, 2026
Description
A sci-if shroud for the XShot Piston Pump. Other versions coming but for now this is the main one.
I print and test largely in PETG. So if your not doing the same (even if you are) I suggest you cut the model in half horizontally and then cut it again to do a small print of the back area where you can test the fit of the tab (printed separately and glued in) as well as the top rail/coupler/clips. And then do a small test print of the front to confirm the larger opening works for you and that the path for the barrel is not to tight/loose.
Uses an optional o-ring for barrel retention and the front. This added last minute so I hope it works however it is. It needed as the shroud uses the default collet
Top rail prints on its own and uses two M3x12 screws.
Uses a clip in tab to help secure the shroud below the grip area
Uses a clip on top of the pic rail with bars you print to slide them in to help secure the shroud via the top rail
Has screw holes to allow for using screws into the collet (I don’t use that personally so I don’t know how effective it really is)
Recessed front area to support push on or other types of accuracy attachments that are 22mm or less in diameter.
Tab is printed separately and glued in.
A version you print in half horizontally and then use hardware to screw together.
Position how you like but I placed the back of the grip area on the print bed and used tree supports. 3 - 6 walls based on abuse you plan to put it through and infill based on how heavy you want it.
License:
Standard Digital File License
Beneto
