Small Single Lane 180 for diecast cars 3D Printer File Image 1

Small Single Lane 180 for diecast cars 3D Printer File Image 2

Small Single Lane 180 for diecast cars 3D Printer File Image 3

Small Single Lane 180 for diecast cars 3D Printer File Image 4

Small Single Lane 180 for diecast cars 3D Printer File Image 5

Small Single Lane 180 for diecast cars 3D Printer File Image 6

Small Single Lane 180 for diecast cars 3D Printer File Image 7

Small Single Lane 180 for diecast cars 3D Printer File Thumbnail 1

Small Single Lane 180 for diecast cars 3D Printer File Thumbnail 2

Small Single Lane 180 for diecast cars 3D Printer File Thumbnail 3

Small Single Lane 180 for diecast cars 3D Printer File Thumbnail 4

Small Single Lane 180 for diecast cars 3D Printer File Thumbnail 5

Small Single Lane 180 for diecast cars

c_irons

March 10, 2022

Description Comments Tags

Description

This is a small single lane 180 degree turn for diecast/hotwheels cars. Print one each of the track components then 2 Hotwheels track connectors and 3 slim connectors. If your slim connector fits really tight you might want to try scaling it down on the Z axis, but you want them to be pretty tight. You can see this model created here: https://www.youtube.com/watch?v=WsD19RAZAOw

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

No

Resolution:

0.28 layer height

Infill:

15%

Filament: Overture PETG Pink (in the video)

Notes:

I print with PETG, 2 walls, 15% infill, 0.2 layer height first layer, then 0.28 for the rest of the model. I orient these so that they are standing up. (52 minutes ish in the video) I did not have to use supports but if you are worried you can support from build plate (but you should just go for it honestly. This does test your bed adhesion, good luck.

Category: Toy & Game Accessories

License:

Creative Commons — Attribution — Noncommercial