Parametric Dungeon Master Tome Insert

Create an insert to your desired size to fit in your Dungeon Master Tome or Smaller Tome!

The Dungeon Master Tome has a space of 5x7x3 and the smaller tome has a space of 4x6x2.

If you have the Dungeon Master Tome and want an insert that fills the entire bottom, you can generate an insert that is 5x7x1 and it will fill the whole bottom.

Fractions can be used, too. You can choose two inserts of 2.5x7x1 or 5x3.5x1 to fill the bottom of the Dungeon Master Tome if you'd like. Find the size you need and go to town!

The f3d file you can download is a Fusion file. A free version of Autodesk Fusion is available so you can modify the file as you'd like. In some of the pictures you'll see some of the inserts are divided into compartments. You can use the f3d file to create that if you'd like.

To adjust your insert using Fusion, simply open parameters.

All you need to adjust are these values to create the size you need.

When generating your insert, two will be created. One that has an angle cut into it and one that does not. The lid of the Dungeon Master Tome and Smaller Tome covers have magnets embedded in it to keep it closed. This can interfere with the insert that's on top where the magnets would interface. In this case, you'll want to use the cutout insert so the book can still close.

Thank you for your time and consideration on this matter.

For those who have joined my club at the “Obsessor” tier or have subscribed to my commercial membership on Patreon, prints of models generated from this Fusion file can be used for commercial purposes.

Feel free to join my discord for additional support, questions, or suggestions!