Action Stand for Transformers AotP Micronus Prime

Haven't gotten as inventive a bot as Micronus Prime in a while, and we're smitten by his little unicycle mode! One thing though - it kinda doesn't really balance without its back exhaust things rotated downwards as kind of kick stand. So thought it would be fun to make up a little stand to open up some options for posing and display!

Coming as a simple three piece set, the largest piece snugly goes around the wheel to balance it, and the extra two bits fit on the end of the exhaust pipes. The main piece is flat bottomed so now the unicycle can be stood upright!

The main purpose for the exhaust pieces being that they will add 3mm pegs for effect parts to attach onto!

But wait there's more - we've also designed two slanted edged on the bottom side of the main piece - allowing for a slight and more dramatic tilted pose! So you can really make it look like Micronus is zooming around on it.

And because the "hands" are no longer needed for balance, you can just have the unicycle on its own - which is its own charming look. And the more astute amongst you might have spotted an additional 5mm port on the rear bottom, where again its effect part compatible for more dynamism.

Coming over to his bot mode, we didn't just want these pieces to lay loose around. so there's a 5mm port on the bottom to attach it to Micronus' back and finally the pair of exhaust addons can also be pegged onto the sides!

Admittedly, balancing him might take a little bit of work but these configuration adds all the 3mm pegs and a central 5mm port for even more display options!

And of course, the exhaust bits can again be swapped onto his fingers for zappy hands mode!

Finally, if you have a compatible stand, you might be able to peg it into the ports on the back to allow him flight. Though this can be a little tricky - so an alternative can be to balance him on the stand too :)

===

This model is not to be uploaded or sold in any form and is intended for personal use only.

Check out more of what we are up to over at our Facebook Page (http://www.facebook.com/FunbieStudios)

Support us on Patreon - https://www.patreon.com/FunbieStudios | Full listing of Models - https://funbiestudios.com/model-catalog