MJX 7303 1/7 Citreon C3 Rally Car Inner Guard Liners

Inner guard liners for the MJX 1/7 Citreon C3 Rally Car.

UPDATES 

RE-TWEAKED FRONT GUARDS FOR NEW TYRE FROM ALIEXPRESS WHICH CAUSED RUBBING ON INNER WALLS ON FULL LOCK

May look like an already available set on the market, but after seeing all the broken liners from people that had bought them I decided to make a better set. Hopefully these hold up better, if they don't, hey least you didn't pay for them right? Added chassis relief on all the areas where a hard hit/rollover would cause the liner to shatter

Framework is extra heavy duty should outlive a few liners, 2 sets are included one that will allow you to screw a M3x10mm(8 needed) screw straight in and another set that will allow you to press in some M3 heat inserts for some added strength. Alternatively you can use M4x10 screws on the insert type framework

Front liners have been reliefed to suit the TPU front splitter available on Aliexpress and will work with stock foam bumper with a slight trim on the inner

Highly suggest printing in TPU as this will last forever, mine is all printed in ESUN PLA-ST which is a stronger, high impact absorbing version of PLA, I call it 'RC Filament' :)

I printed ALOT of liners to adjust the fitment to the body while keeping the wheel centered as much as I can, if you would like to make changes/fixes please feel free and remember to always share!