Trajan insert (sleeved, box to table) low PLA

This is an insert for Trajan.  I tried to make an insert that can be “box to table”, and that can be stored on the side, including player aids.  And I removed as much filament as possible (and commonized the pieces for quick printing).  I use bags for the green, the yellow and the big gold/end game scoring tiles (you will see them in the center.  I highly recommend using 3 bags for those and just putting the bags in the center with the components in them.  It works well.

The insert needs 14 player and component trays (printed in Gray), 1 card tray (double height), and 15 lids (all use the same lid).  In the 3MF, you will find 1 lid, and 2 trays (design).  I included 4 lids with color at the top (if you want to print player trays with colored lids, then print “1” of each colored lid.  If you print the colored lids, just print 11 gray ones.  

All pieces are set up to have no top or bottom layers.

I was able to print 4 pieces on a plate, but always recommend printing one model at a time :)

There is no lid lift.