Print in Place Articulated Santa Miniature

Print in Place Articulated Santa Model
 

Hey everyone! 🎅✨
Getting into the holiday spirit with this one - an articulated Santa flexy figurine! 🎄
It’s the perfect time to start preparing for the festive season, and this jolly little guy is ready to spread some cheer. Whether you’re printing for fun or offering holiday-themed prints, this Santa is sure to bring a smile. 🎁

⚠ Note:
Before printing, make sure your printer bed is clean and properly leveled for the best adhesion. Also, double-check all temperature and speed settings based on the filament type you’re using to ensure optimal results.

The model is designed to be printed at the provided size 69.3 × 80 × 22.96 mm (≈ 2.73 × 3.15 × 0.90 in) - scaling it down may affect the articulation and joint clearance, so adjust carefully if you choose to resize.

🖨 Recommended Print Settings:

• Layer Height: 0.15–0.2 mm

• Infill: 10–15%

• Perimeters/Walls: 2

• Model in Preview Size: 69.3 × 80 × 22.96 mm (≈ 2.73 × 3.15 × 0.90 in)

• Supports: Not required (model is support-free)

• Material: PLA recommended

• Orientation: Print flat on the build plate

💡 For the best articulation, check that joints move freely after cooling - gently flex each part to loosen up the hinges.

More models and commercial license are available for my Patreon supporters ✨
Join here to get access: https://www.patreon.com/kogi3d