Carrera Wireless+ Handle for Slot Cars

I had an issue where my original handles started decomposing and cracking, so I wanted to have something to replace them. One additional benefit is now I can full color code them to match my race management software.

To print:

• 1x handle_tops (0.1mm resolution)
• 1x handle_bottoms (0.2mm resolution)
• 4x handle_pin (0.2mm resolution)
  • These may need to be scaled depending on your printer

I tried to make the files in the correct orientation so you shouldn't need any supports. I printed this in various PLA colors. You may try to print the tops in softer TPU if you're trying to achieve the feel of the OEM handles.

Assembly:

The 4 pins provide way to line up the top and bottoms when gluing them together. They are not necessary if you can't seem to find a fit.

The handles should snap into the original controllers. The tabs on the edges of handle_bottoms might break a little, but it should ensure they snap into place.