December 23, 2025
Description
Do you already have the Death Star display stand for your Wave 1 Funko Bitty Pop Star Wars figures and need another stand for Wave 2?
Here's a new display stand for your Funko Bitty Pop Star Wars figures: the Millennium Falcon!
There are at least two possible configurations (see pictures):
For 16 figures from wave 2, use these shelves:
On top: shelfx4fortop.stl
On bottom: shelfx4.stl
For 19 figures (wave 2 and 3 special figures Luke Landspeeder, Luke Video Game and Lando Facon), use these shelves:
On top: shelfx3.stl
On bottom: shelfx6.stl
shelfx4.stl
Depending on your printer, you may need to sand the shelf mounting brackets and the two parts for the base.
Simply print in PLA with a 0.4 nozzle and a 0.20 layer height (this is sufficient). No support is needed except for the base. Print in two colours (gray and white for the reliefs), with method depending on your printer's capacity (multi-spool or pause to change spool).
Instead of using the base, you could hang it on an IKEA Skadis panel! Use the bracket I made here: https://www.printables.com/model/1524904-skadis-mount-for-funko-bitty-pop-star-wars-death-s
Show me your prints!
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Jmike_fr
