Bloodhound SSC Model Car (3/16 inch dowel)

I used a 3/16 inch dowel to act as an axel for the wheels. 

Printed using PLA

Requires a lot of color changes using AMS but worth it! Toolchanger 3D printer highly recommended for this but normal multicolor such as the AMS works fine. 

Note that you can scale the model to fit your own dowel/axel if needed. I recommend starting with the default scale and see if your printer can handle it first. 

Some supports are hard to move, so be careful (I managed to break the tail).

Feel free to remix and improve the model!