Bunchems Eyes with Eyelashes – Snap-Fit 3D Printable Accessory

These are 3D-printable eyes with eyelashes designed specifically to fit Bunchems (the small spiky balls that stick together).

The eyes are sized to press gently into Bunchems without glue, making them reusable and safe for creative play. Eyelashes add extra character and expression, making figures and animals more lively and fun.

The model is optimized for simple and reliable printing, using PLA and standard printer settings. No brim is required, and supports are only needed from the build plate.

After printing, the eyes can be carefully removed from the supports using a sharp knife or hobby blade for a clean finish. Take your time and work slowly to avoid damaging the eyelashes.

Multi-color printing (optional)

If you want multi-color eyes, you can pause the print or use color changes at the following layer heights:

• Black: layers 0–62

• White: layers 63–70

• Blue: layers 71–79

Print Settings

• Layer height: 0.15 mm (structural)

• Infill: 15%

• Brim: No

• Supports: Yes – Support on build plate only (Grid)

• Material: PLA