🐛MMMega Millipede: Print in place, articulated, support free, multiple lengths, optimized.

Info:

• for those who likes it REALLY long
• more info about print at long millipede print
• introduced spiral curve, so it can be much longer
• added also variant for Prusa MINI

200 vertebras print is in the end about 117cm long.

Lengths:

• 200 or 300 vertebras for MK3S+
• 200 for MINI

Print info:

• BRIM:
  • more info in linked print, but in general, decide the brim carefuly based on your experience. I have used 0.4mm brim separation and on some parts of print it came off easily, while on others it was quite pain. But it took me about 15min to remove the brim ( on 300 vertebras variation it would be more).
  • so if you have excellent adhesion, you can try to use it without brim, but it is risky
  • if you want safety for such long lasting print, choose some brim.
    • possibly use more than 0.4mm if you have good results with that, it will save you some time on post processing
  • I chose safety for 19h or 28h print :)