January 11, 2026
Description
I designed the whole model able to be printed and assembled with no AMS, no supports, and no sanding or gluing. However, depending on your printer, tolerance, and settings you may need to sand and glue some parts. I found that the black eye pieces sometimes don't print perfectly on the top because it's thin, but they still work just fine. Let me know if there is any way I could improve this model. Enjoy!
Recommended Settings:
Filament type: PLA
Layer height: 0.2 mm
Infill: 10% with any pattern
Wall loops: 2
Support: No
Bed Adhesion: None
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Kazi
