January 18, 2026
Description
The additional blocks represent the available variants consisting of two merged blocks: Two mirrored L-, one T- and one X-shaped block.
The L- and T-blocks may be removed form the tower, the X-block is impossible to take out.
Hardwood blocks of 13,5mm x 26,8mm x 80,95mm
Printed in PLA, I added perimeters for strength and increased infill, so that the weight is closer to the hardwood blocks.
Elements can be scaled in the slicer to fit other hardwood blocks.
JENGA® is a registered trademark owned by Pokonobe Associates.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Gunter
