January 30, 2026
Description
The key to the bouncy surface is to use this hack!
Print Specifications
Filament: PETG
Specification | Value |
Estimated Print Time (Ender-3 V2) | 30 Minutes |
Filament Used | 5.2 g |
Layer Height | 0.16 mm |
Wall Thickness | 5 perimeters |
Infill Density | 25% |
Solid Layers: Top | 0 |
Solid Layers: Bottom | 0 |
Perimeters | 5+ |
Supports Required | No |
Adaptive Layer Height | Disabled |
Settings Used
This Print: 0.40mm nozzle • 245°C Nozzle • 80°C Bed
Print Notes
Optimized for Ender 3 V2 with BLTouch bed leveling
Uses off-print purge line to prevent nozzle blobs
Exported from PrusaSlicer
⚠ Adjust temperatures +/-5C if experiencing adhesion or stringing issues
Recommended: Test on a small print first before large jobs
License:
Creative Commons — Attribution
MindCubby
