Little Rocket Mighty Mama Modular Blaster

The Little Rocket Mighty Mama is a 3D-printed blaster designed and engineered by Tarik. It takes the Little Rocket's minimalist springer concept to new levels with a maximized plunger volume and spring load. With the larger plunger volume and the same twist-lock breech as before, you can hot-swap to an expanded variety of ammo types -- and with more power than before. Mighty Mama can be held in the hand or mounted to any rail spec with the appropriate rail plate (includes the Picatinny rail plate). Add this versatile panic button to any primary blaster! Includes a short dart barrel with every purchase! 

FEATURES:
• Little Rocket Mighty Mama
• Mountable 3D-printed blaster
• Highly customizable to your preferred playstyle
• Powerful minimalist blaster
• Hot-swappable barrels can fire most major ammo types
• Compatible with Picatinny rail spec
• Convertible to other rails with adapters (sold separately)

PERFORMANCE:
Average FPS (Standard Deviation)
• 118 (3) with the standard short dart barrel
• 140 (6) with the sniper barrel

Check the photo gallery for Little Rocket Barrel compatibility

FILES INCLUDED:
• 1 Mighty Mama body + 3D parts
• Standard Trigger
• Anchor / T-Pull priming rod
• Short Dart Barrel

RECOMMENDED PRINT SETTINGS:
• Quality: No scarf seams or joints
• Strength: At least 4 wall loops
• Supports: Enabled, tree (auto) on breech lock lever and plunger head
• Others: Outer brim on Decorative Barrel for better bed adhesion

HARDWARE NEEDED:
Get the complete Hardware Kit here!
• 8 M3 Square Nuts, 
• 8 M3 x 12mm socket head screws
• 1 16mm O-ring
• 2 Dash 123 O-rings
• 1 24mm Ball-pin Rod
• 1 Trigger spring
• 1 012 Main spring
• 1 M3 x 12mm ball pin rod
• 1 1.5in OD clear plastic plunger tube
• 2 M3 Hex Nut
• 2 M3 x 30mm hex Screws

LINKS:
• Hardware Kit
• Mighty Mama Manual
• Little Rocket Barrels
• Darts + Ammo