Insignia Flight Stand for Transformers AotP Silverbolt

Wanting to complete the flight stands for the Aerialbots, here's the final stand for their leader Silverbolt!

As compared to the earlier Insignia for his squad, we've assigned a higher "Captain" rank for him as seen in the lower right corner of the Insignia. This makes him an Air Infantry Captain.

On the other end of the flight stand which pegs onto Silverbolt, we've a pair of shallow square pegs which will connect to the corresponding ports on Silverbolt's chest.

The three points of articulation for this stand should give a wide range of different display angles and options to showcase Silverbolt in flight.

We're quite partial towards this upwards pose for him, to really showcase his wings and the twin Autobot logos on them. And together with the earlier Flight stand for Air Raid and Slingshot, which will also fit Fireflight and Skydive (https://www.patreon.com/posts/127791732), you can have the entire team posed in flight!

=== Assembly ===

The included diagram shows the parts which comprise this build.

You will need a M3x10mm bolt, a M3x14mm bolt and a pair of corresponding M3 nuts for them.

===

This model is not to be uploaded or sold in any form and is intended for personal use only.

Check out more of what we are up to over at our Facebook Page (http://www.facebook.com/FunbieStudios)

Support us on Patreon - https://www.patreon.com/FunbieStudios | Full listing of Models - https://funbiestudios.com/model-catalog