Lost Ruins Of Arnak Adventure Chest Board Game ALL IN

If you want, you can help me with designing inserts by donating here:

https://www.paypal.com/donate/?hosted_button_id=J2YS7MREH8MU8

Hello,

for those that don't know my ‘insert philosophy’ - I am creating modular inserts that are focused on reducing setup and space on table, filament consumption is not my highest priority, but of course I'm trying to save some material where I can.

Important Notes:

• If you want to acquire commercial licence for this model, visit my club page on printables,

• Clearence for holder covers is very small - 0.2mm horizontal. Please print the smallest holder and cover for it to check if it fits, if not you may need to calibrate printer or enlarge cover a bit (adding 0.2-0.4mm to the width in the slicer should be enough),

• card holders - they're very tight, so in order to put all cards you may need to squeeze them in, just put most of the cards in and when you have trouble adding more - one side of the holder (front one) is shorter, so you can put cards on top of the cards that are in the holder, squeeze them a little and then you will be able to fit all cards.

• by default it doesn't support promo cards, but there should be some space left for scaling (add ~0.5mm for each promo card). I might update it in the future to support promo cards out of the box if I manage to get them.

Supports:

• vertical storage - best to have setup holder on the bottom,

• Expedition Leaders expansion,

• The Missing Expedition expansion,

• Twisted Paths expansion,

• Geekup Bits,

• custom moon staffs, research tokens,

• should support meeple stickers and possibly custom meeples / minis,

• custom coins, compasses,

• sleeves - this is mainly design for 70 microns sleeves (I use Sloyca). Card holders are pretty tight, so you won't be able to squezze thicker sleeves without adjustments. For 100 microns what I recommend is to enlarge the card holders to 144% in the slicer on one axis, I think this should be enough. Then you can store some of them where I store them and others in the space left next to setup holder.

This insert features:

• temple tiles holder - adjust tiles count according to player count and put on the whole holder on the board,

• owl temple tiles holder - same as above,

• site, guardian tiles holder - take them out and put it on the table. Underneath are meeples etc. hidden, I store them there because it reminds me to sort the tiles at the start of the game,

• one giant holder for coins, compasses, resources, assitants- take it out and put on the board,

• fear, items, artifacts cards holders - take it out and put them on the board,

• setup holder - everything else related to setup, characters, solo, campaign is stored there.

Requirements:

• about 750g filament needed, (depends on your settings, I printed with 12% gyroid infill, 2 walls, 5 top and 3 bottom layers, 0.62 line width), 

• at least 220mm x 146mm print bed.

Instructions:

Supports - no supports required.

• every file ended with xX (for example x16) - print X times (in given example - 16 times),

• refer to pictures how to organize the box.

What future holds:

• If I manage to get promo cards, I might adjust holders to fit them.

• If geekup bits that will come this year won't fit, I will adjust the setup holder.

Enjoy!