Fixum Dude Motors PiP Armored Truck

Introducing the FDM (Fixum Dude Motors) print in place Armored Truck. It's a safe bet you'll get hours of fun from this armored truck.

Find the entire FDM Collection of vehicles here: https://www.printables.com/@fixumdude/collections/696315

Includes single color, two color, two different 4 color versions and a single color version with snap on wheels to print them is a different color than the truck. 

Prints without supports. Sample printed in:
EXAMPLES:

Green truck: 4 colors, 0.2 layer height, with 3 perimeters, 5 top & 4 bottom layers and 10% gyroid infill in PolyMaker Green PLA, Bambu lab basic black PLA, and Overture White PLA. (design 2)

White truck: 0.2 layer height, with 3 perimeters, 5 top & 4 bottom layers and 10% gyroid infill in PolyMaker white PLA, Bambu lab basic red PLA, Bambu lab basic black PLA, & Bambu lab silk silver PLA.

SNAP ON WHEELS:

• Take one axle and fold it in half

• Snap axle into one wheel (wheel tread has direction if you care about which way the tread lines point)

• Snapping the wheel onto the axle will take some force, so a helper tool is provided. Place the folded axle in the tube and use the flat end to apply force

• Place that axle/wheel assembly through the hole on the vehicle, then snap the other wheel on the end of the axle, paying attention to the tread direction if it matters to you.

• The flat side of the helper tool may be used to help press the loose wheel onto the axle. Placing the vehicle/wheel/axle on a flat surface during this process helps.