2 Part Moulds (Molds) for Silicone Dicemaking

Version 2:

• Added a second locating feature so that mould halves should lock together better
• Added a hole either end that will take either an M6 or 1/4" bolt for more convenient clamping

---

I've been going down a bit of a dicemaking rabbithole of late, so drew up a simple two part mould for pouring silicone to create cap moulds for dice.

To use, just print two parts of the size you need (45, 75 or 100mm), clamp together and add clear tape to the bottom. Voila, one easily extractable 2 part mould maker.

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

No

Supports:

Resolution:

0.2mm

Infill:

Filament: ERYONE PLA

Category: Dice