Dragonsnake XXL

With great excitement, I’m proud to present the Dragonsnake XXL!
A truly gigantic and one-of-a-kind model that pushes the limits in size and detail.
This impressive creature is designed to stand out and make a statement in any collection.

I can’t wait to see your prints and creations!
Enjoy bringing this massive Dragonsnake to life!

🔒 Members exclusive

📏 Approx. 135 cm / 53 inches long
💪 Printed at 400% scale compared to the original
🧩 All parts are separate
👉 You can print more or fewer parts as you like.

🖨 Print Settings

• Layer height: 0.2 mm (for smooth results)

• 2 walls

• 15% adaptive cubic infill

• No supports needed! 🙌

🧩 Assembly Notes

• Connector pieces match the parts with the same name (e.g., head + head connector)

• Arms and legs come with left and right connectors

• Insert and plug everything together

• Glue required: only apply glue to the connector and the receiving part

• ⚠ Do NOT glue the jointed/moving parts, or they will lose articulation!

Printed with Sunlu Filament🧵

Enjoy ✅

This design is under copyright. Which means, upon purchase, you do NOT have the right to sell commercially. If you are interested to get access to my exclusive Design Library & the commercial License to sell the printed models check out my Printables Club Membership. Please note that you only have a commercial license with active Membership and it is absolutely forbidden to share the digital Files!

Print settings
A clean and leveled bed is required
2 walls
Infill 15%